01-11-2016, 01:16 AM
(This post was last modified: 12-07-2016, 10:19 AM by smartarduino.
Edit Reason: for the new version ESPduino.
)
Hi, everyone, in order to use the ESPduino from DOIT company, please read the manual attached in the following link.
The new version ESPduino (order it after Sep. 30, 2016), don't press any button, and just do it by the following link.
https://github.com/SmartArduino/SZDOITWiKi/wiki/Arduino---ESPduino
(1) Download the right software by the given links;
(2) Install the CH340 driver;
(3) Choose the development board type as "ESPduino(ESP-13 module)";
(4) Confirm whether the "Reset Method" is "ESPduino-V2" OR "ESPduino-V1";
(5) Test the Arduino IDE for ESPduino development board.
The new version ESPduino (order it after Sep. 30, 2016), don't press any button, and just do it by the following link.
https://github.com/SmartArduino/SZDOITWiKi/wiki/Arduino---ESPduino
(1) Download the right software by the given links;
(2) Install the CH340 driver;
(3) Choose the development board type as "ESPduino(ESP-13 module)";
(4) Confirm whether the "Reset Method" is "ESPduino-V2" OR "ESPduino-V1";
(5) Test the Arduino IDE for ESPduino development board.