12-20-2015, 03:28 AM
(This post was last modified: 08-08-2016, 09:36 AM by smartarduino.)
Here shows how to download(update) firmware for DoitCar.
Step 1: Download Flash_download_tools
Flash download tool
Step 2: Download the new fireware:
See the attachments
Step 3: Plug ESP12E(Esp12F)-devKit into USB port with microUSB.
![[Image: uSHLR43.jpg]](http://i.imgur.com/uSHLR43.jpg)
Step 4: Open the ESP FLASH DOWNLOAD TOOL. And the configuation is shown as belows.
Attention: Choose correct Serial Port and correct firmware
Step 5: Press "START". Keeping press "FLASH" button, then press "RESET" button. Then the downloading process begins:
![[Image: 161539jffhffrffbe0clm0.png]](http://bbs.doit.am/data/attachment/forum/201512/17/161539jffhffrffbe0clm0.png)
Step 6: Done. Reboot the Esp12E devKit. The blue light will be keep lighting.
Step 7: If the esp8266 dev kit show errors. pls using blank1024.bin to erase flash.
blank1024.bin
ESPduino and nodemcu source code for car is at:
https://github.com/SmartArduino/Doit_Cloud/tree/master/Doit_Wechat_Car/ESP8266%20Arduino%20Code
Enjoy it.
Step 1: Download Flash_download_tools
Flash download tool
Step 2: Download the new fireware:
See the attachments
Step 3: Plug ESP12E(Esp12F)-devKit into USB port with microUSB.
Step 4: Open the ESP FLASH DOWNLOAD TOOL. And the configuation is shown as belows.
Attention: Choose correct Serial Port and correct firmware
Step 5: Press "START". Keeping press "FLASH" button, then press "RESET" button. Then the downloading process begins:
Step 6: Done. Reboot the Esp12E devKit. The blue light will be keep lighting.
Step 7: If the esp8266 dev kit show errors. pls using blank1024.bin to erase flash.
blank1024.bin
ESPduino and nodemcu source code for car is at:
https://github.com/SmartArduino/Doit_Cloud/tree/master/Doit_Wechat_Car/ESP8266%20Arduino%20Code
Enjoy it.