Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
How to download fireware
#1
Here shows how to download(update) firmware for DoitCar.

Step 1: Download Flash_download_tools


Flash download tool

Step 2: Download the new fireware:
See the attachments


Step 3:   Plug ESP12E(Esp12F)-devKit into USB port with microUSB.
[Image: uSHLR43.jpg]


 
Step 4:   Open the ESP FLASH DOWNLOAD TOOL. And the configuation is shown as belows.
        Attention: Choose correct Serial Port and correct firmware



Step 5: Press "START". Keeping press "FLASH" button, then press "RESET" button. Then the downloading process begins:


[Image: 161539jffhffrffbe0clm0.png]

Step 6: Done. Reboot the Esp12E devKit. The blue light will be keep lighting.

Step 7: If the esp8266 dev kit show errors. pls using blank1024.bin to erase flash.

blank1024.bin


ESPduino and nodemcu source code for car is at:
https://github.com/SmartArduino/Doit_Cloud/tree/master/Doit_Wechat_Car/ESP8266%20Arduino%20Code
Enjoy it.


Attached Files
.zip   Doit_Nodemcu_Car_20160115.zip (Size: 205.13 KB / Downloads: 1,332)
Reply


Forum Jump:


Users browsing this thread: 1 Guest(s)