SmartArduino

Full Version: Doit Car firmware download
You're currently viewing a stripped down version of our content. View the full version with proper formatting.
Here shows how to refresh firmware for DoitCar.

Step1:   Plug ESP12E-devKit into USB port with microUSB.
[Image: uSHLR43.jpg]


 
Step2:   Open the ESP FLASH DOWNLOAD TOOL. And the configuation is shown as belows.
        Attention: Choose correct Serial Port and correct firmware: doit_car_20150914_2

[Image: JqPS9Fz.png]

Step3: Press "START". Keeping press "FLASH" button, then press "RESET" button. Then the downloading process begins:


[Image: UW3V15x.png]

Step4: Done. Reboot the Esp12E devKit. The blue light will be keep lighting.

Enjoy it.

ATTACHMENT: http://en.doit.am/DoitCAR.zip